Wi-Fi LED Controllers

A range of constant voltage controllers for single color, CCT, RGB, RGBW and RGB+CCT LED strips. Choose a Wi-Fi or Zigbee 3.0 model to match the lighting type and control system. Available in one to five output channels.

The WT1 is a two-channel constant voltage LED controller for single-color and CCT LED lighting. It supports Tuya Wi-Fi app control, RF 2.4GHz control and a momentary push switch. With a 12–36V DC input and 5A output per channel, it is suitable for compatible low-voltage LED strip lighting systems.

The WT5 is a five-channel constant voltage LED controller for single-color, CCT, RGB, RGBW and RGB+CCT LED strips. It supports Tuya Wi-Fi app control and optional RF 2.4GHz remote control. With a 12–24V DC input and 3A output per channel, it is designed for compatible low-voltage lighting systems. A separate UL-certified version is available.

The V1-L(WT) is a single-channel constant voltage controller for compatible single-color LED strips. It supports Tuya Wi-Fi app control, RF 2.4GHz remote control and an external push switch for dimming. The 12–48V DC input supports different low-voltage lighting systems; the permitted output current depends on the selected voltage and PWM frequency.

The V5-L(WT) is a five-channel constant voltage LED controller for single-color, CCT, RGB, RGBW and RGB+CCT lighting. It supports Tuya Wi-Fi, optional RF 2.4GHz remote control and an external push switch. Select the connected LED type before pairing it with the Tuya app.

The V2-S(WT) is a Tuya Wi-Fi controller designed specifically for 2-wire WW+CW LED strips. It supports color temperature and brightness adjustment through the Tuya app, an optional RF 2.4GHz remote and an external push switch. Check that the connected strip uses the compatible 2-wire CCT configuration before installation.

The WT-SPI is a Tuya Wi-Fi and RF 2.4GHz controller for compatible RGB and RGBW SPI pixel LED strips. It provides two SPI signal outputs and supports up to 1,000 pixels, with dynamic scenes configured through the Tuya app. Confirm the LED strip chip type, color order and power requirements before installation.

The V4-T(WT) is a four-channel constant voltage controller for compatible single-color, CCT, RGB and RGBW LED strips. It supports Tuya Wi-Fi and optional RF 2.4GHz control, with an RJ45 DMX512 connection for synchronized master–slave installations. Select the lighting type and match the power supply and load before installation.

The VD1(WT) is a single-channel constant voltage dimmer for compatible single-color LED strips. Control brightness through the Tuya app, an optional RF 2.4GHz remote or the three buttons on the device. It supports 5–24V DC input and up to 5A output.

The VD3(WT) is a three-channel constant voltage controller for compatible RGB LED strips. It supports Tuya Wi-Fi app control, an optional RF 2.4GHz remote and three built-in buttons for on/off, lighting modes and color adjustment. Each output channel is rated up to 1.5A.

The VD4(WT) is a four-channel constant voltage controller for compatible RGBW LED strips. It supports Tuya Wi-Fi, optional RF 2.4GHz remote control and three built-in buttons for local operation. Its four output channels are rated up to 1.5A each.

The VD5(WT) is a five-channel constant voltage controller for compatible RGB+CCT LED strips. It supports Tuya Wi-Fi control, an optional RF 2.4GHz remote and three built-in buttons for lighting adjustment. The five output channels are rated up to 1A each.

The E3-R(WT) is a three-channel PIR motion sensor LED controller for compatible single-color, CCT or RGB LED strips. It combines Tuya Wi-Fi control, RF 2.4GHz control and motion sensing with optional daylight detection. Each output channel is rated up to 1.5A.

The V1-H(WT) is a single-channel constant voltage dimming controller for compatible single-color LED strips. It supports Tuya Wi-Fi, an optional RF 2.4GHz remote and an external push switch. Output is rated up to 9A at 12/24V or 6A at 36/48V, subject to the selected PWM frequency.

The S3(WT) is a three-channel controller for compatible 100–240V high-voltage LED strips. It can be configured for single-color, CCT or RGB lighting and supports Tuya Wi-Fi, an optional RF 2.4GHz remote and an external push switch. Each output channel is rated up to 1A.

The S1-B(WT) is a single-channel AC phase-cut dimmer for compatible dimmable LED lamps and Triac dimmable LED drivers. It supports Tuya Wi-Fi, an optional RF 2.4GHz remote and an external push switch. A DIP switch selects leading-edge or trailing-edge dimming to match the connected load.